PEARLESCENT PAINT

Mother-of-pearl; special copolymer binder, water-based, bright mother-of-pearl look interior façade decorative finishing product.

Application Areas : It is applied as a decorative finish on water-based background paint in order to obtain bright and mother-of-pearl looking figures.

Applicable surfaces : On water-based background paint, satin paint and semi-matte satin.

PHYSICAL FIXTURES:

Colors: Mother of pearl catalog.

PH Value : 8 – 9

Final appearance : Figurative, bright, mother-of-pearl looking.

Theoretical coating value : Depending on the condition of the surface to which it is applied, it is approximately 30-85 ml/m² in a single layer.

Flash point : It is flammable and non-flammable.

Specific gravity : Approx. 1.10 – 1.20 gr/ cm³.

Drying time : Approximately at 20 ºC. It is 30-40 minutes.

Viscosity : 110 – 120 KU (at 25 ºC)

Application Methods : It is applied using a special wedge or sea sponge made of

leather or chamois.

Thinning : No thinning required (If desired, it can be thinned to a maximum of 5% with clean water)

Cleaning of application tools: With clean water.

Required dry film thickness : It depends on the shape and frequency of the pattern to be applied.

Required wet film thickness : It depends on the shape and frequency of the pattern to be applied.

Waiting time between two folds : One layer is enough.


Important warning :
 The values given above apply to environments with a relative humidity of 25 ºC and less than 70 %.

Packaging types : 0,75lt, 2,5lt, 7,5lt,15lt packages

Shelf Life : It is for two years, provided that it is in unopened packaging and kept in a cool place.

Storage and Transportation: In a cool place in a well-ventilated environment and in such a way that there is no direct sunlight.

  • S 2 Keep out of the reach of children.
  • S 3/7/9 Store the box well closed, in cool and well-ventilated places.
  • S 16 Keep away from igniting sources.
  • S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
  • S 24/25 Avoid eye and skin contact.
  • S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
  • S 28 Upon contact with the skin, immediately wash off with plenty of water.
  • S 29 Do not empty into the sewer.
  • S 37 Use appropriate protective gloves.
  • S 46 If swallowed, consult a doctor immediately, show the packaging or label.
  • S 51 Use only in well-ventilated areas.
  • During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
  • Use appropriate personal protective equipment when necessary.
  • Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.