DECORATIVE SAND PRIMER

Water-based background paint, water-based, styren acrylic Copolymer It is an emulsion-based, semi-matte looking interior wall topcoat paint. It is applied as a background paint under the mother-of-pearl paint, Jaguar and Prodesign.

Uses Concrete, plaster and chipboard etc. are applied as a top layer on surfaces.

Applicable surfaces : Concrete, plaster, chipboard etc.

PHYSICAL FIXTURES:

Colors : Interior Wall Color Catalog

PH VALUE : 7.5-9.5

Final appearance : Semi-matte

Theoretical coating value : Depending on the condition of the surface to which it is applied, it is approximately 10-12 m² / L on a single floor.

Flash point : Not flammable

Specific gravity : Approx. 1.42 gr/ cm³

Drying time : Approximately at 20 ºC. 30 – 40 minutes

Viscosity : 116 KU (at 13 ºC )

Application Methods : It is applied with a brush or roller.

Thinning: Thinned with clean water (20% for the first floor, 10% for the second floor)

Cleaning of application tools: With clean water

Required dry film thickness : Approximately 70 – 80 microns (in 2 layers)

Required wet film thickness : Approximately. 50 microns ( single layer )

Waiting time between two layers : 2 – 4 hours

Important warning : The values given above apply to environments with a relative humidity of 25 degrees Celsius and less than 70%.

Packaging types : 3.5 kg, 10 kg, 20 kg packages

Shelf Life : For one year, provided that it is in unopened packaging and kept in a cool place

Storage and Transportation: In a cool place in a well-ventilated environment and in such a way that there is no direct sunlight.

  • S 2 Keep out of the reach of children.
  • S 3/7/9 Store the box well closed, in cool and well-ventilated places.
  • S 16 Keep away from igniting sources.
  • S 23 Do not inhale Gas/Smoke/Vapor/Aerosol.
  • S 24/25 Avoid eye and skin contact.
  • S 26 In case of contact with eyes, immediately block with plenty of water, immediately consult a doctor.
  • S 28 Upon contact with the skin, immediately wash off with plenty of water.
  • S 29 Do not empty into the sewer.
  • S 37 Use appropriate protective gloves.
  • S 46 If swallowed, consult a doctor immediately, show the packaging or label.
  • S 51 Use only in well-ventilated areas.
  • During the application of processes such as sandblasting and burning on painted surfaces, harmful dust and / or smoke may be released, work in well-ventilated places.
  • Use appropriate personal protective equipment when necessary.
  • Upon request, a Safety Data Sheet (MSDS) and/or Technical Bulletin may be requested for detailed information.